贴合模切原理图示

Stick to match the mold to slice the principle diagram to show

  产品特性

  1．一站式平压平贴合模切贴合剥离取碎口组合系统运转速度快，操作人性化，工作效率高，可节约人力。

  2．产品性能稳定，自动化程度高，全部采用国际顶级跨国公司所提供的触膜屏系列 、电气控制系统，以确保开机、停机或加减速时走料的平稳性，从而减少加工质量不稳定的烦恼。

  3．利用光电感应装置，提高加工精准度，防止材料表面划伤/损坏。

  4．贴合、模切、剥离取废各装置可独立自主的调整位置/角度。以配合模切、贴合、取废料所需最佳角度和效果，从而确保产品加工质量。

  5． 根据材料厚薄与特性在拉料、压料各系统中，都设计了自动和手动两种可调的装置。以改变走料的张力、贴合的压力及平行度，防止因脱离不稳定而造成的前后、左右跑位、起泡、起皱和压伤材料等现象。

  6. 一站式平压平贴合模切贴合剥离取碎口组合系统应用于电子业用的PEI、PP、PVC、粘胶、不织布、绝缘材料、屏蔽材料、导电材料、防震缓冲胶垫、海棉、铭板、背光/反光系列产品。

One-stop stick to match the mold to slice to stick to match the removal to take a system

Product characteristic

  1.  One-stop even flatten to stick to match the mold to slice to stick to match the removal to take a combination system  operation speed quickly, operation humanization, the work efficiency is high, can economize the manpower.

  2.  The product function is stable, the automation degree is high, the international top-class multinational company of all adoptions provide of touch the film to hold the series electricity  control system, to insure to switch on, shut down or add and subtract soon steady sex that hour walks to anticipate.Thus reduce to process the unsteady agony of quantity.

  3.  Make use of the light electricity responds the device, raising to process the precise degree, keeping the material surface from row wound/ damage.

  4.  Stick to match, the mold slice, removes to take to discard each device can independent independent adjustment position/ angle.Slice, stick to match, take the best angle and results that waste needs with the match mold, thus insure the product to process the quantity.

  5.  According to the material degree of thickness and characteristics in pull anticipate, pressing anticipate each system, all designed the auto and hands to move two kinds of adjustable devices.With the tension that the change walks to anticipate, stick to run parallel with of pressure and, prevent°from resulting in in front and back because escape from unsteady, or so run, rise the bubble and shrivel and press to harm the material etc. phenomenon.

  6.  One-stop even flatten to stick to match the mold to slice to stick to match the removal to take a system to apply the PEI, PP, PVC, glue, non-woven fabric that uses in the electronic industry, insulate the material, shield the material, conduct electricity the material, quakeproof buffer gum mat, sea cotton, plank of and carry on the back the light/ reflection series to produce!